AP/Y10-CV
APA Gloss White Monomeric
Gloss White “Fast Absorber”, designed for superior print quality with a fast drying time, suitable for most promotional applications. Perfectly formulated for application to aluminium composite panel and corflute with an Eco-Acrylic permanent adhesive and added opacity for a higher white point.
FILM:
Calendared P.V.C.
THICKNESS FILM:
90 +/- 5% micron
LINER:
Clay coated paper 1 side siliconised
RELEASE:
3.5mil
ADHESIVE:
Permanent grey eco-acrylic high cohesion - Not suitable for wet application
SHRINKAGE (48 H AT 70°C ON STEEL):
< 0,4 mm
LIFE:
*4-5 years outdoor (Not printed film, when properly processed, on flat surface and under vertical condition)
APPLICATION TEMPERATURE:
Suggested between 10 and 28 °C
TEMPERATURE RESISTANCE:
From -50°C to + 90°C adhered to steel no variation
Laminate Compatibility Chart:
Chart Key:
|
Matching Component
|
 |
Compatible Media
|
 |
Not Compatible |
 |
* References made to outdoor durability is based on middle European conditions. Exposure to conditions of high temperature as in southern climatic regions or in high polluted areas or in high altitudes or high UV conditions will reduce the performance levels. All Apa-Print media, is quality controlled to eliminate joins, dust and surface imperfections. The values and data given are referred to not printed films and are intended only as a source of information and do not constitute a warranty or a guarantee. It's important that the inks are thoroughly dried before application and before any lamination takes place. Customers must determine the suitability of APA-Print media with there own printers and inks. APA branded products are manufactured under careful quality control and are warranted against defect in material and workmanship. No salesman, representative or agent has authority to give any guarantee, warranty or make any representation contrary to these guidelines.
|
|
