AP/991
APA Clear Cast
White semi-matte cast flexible film for long term application to curtain sided Trucks and similar flexible PVC surfaces. Suitable for solvent, electrostatic, eco-solvent and thermal printers. Also suitable for direct application to painted concrete.
FILM:
Cast P.V.C.
THICKNESS FILM:
2.0mil
LINER:
Clay coated paper 1 side siliconised
ADHESIVE:
Acrylic ultra-permanent high cohesion
SHRINKAGE (48 H AT 70°C ON STEEL):
< 0,2 mm
LIFE:
*7 years outdoor (When properly processed, on flat surface and under vertical condition)
APPLICATION TEMPERATURE:
Suggested between 10 and 28 °C
TEMPERATURE RESISTANCE:
From -50°C to + 90°C adhered to steel no variation
Laminate Compatibility Chart:
Chart Key:
|
Matching Component
|
 |
Compatible Media
|
 |
Not Compatible |
 |
* References made to outdoor durability is based on middle European conditions. Exposure to conditions of high temperature as in southern climatic regions or in high polluted areas or in high altitudes or high UV conditions will reduce the performance levels. All Apa-Print media, is quality controlled to eliminate joins, dust and surface imperfections. The values and data given are referred to not printed films and are intended only as a source of information and do not constitute a warranty or a guarantee. It's important that the inks are thoroughly dried before application and before any lamination takes place. Customers must determine the suitability of APA-Print media with there own printers and inks. APA branded products are manufactured under careful quality control and are warranted against defect in material and workmanship. No salesman, representative or agent has authority to give any guarantee, warranty or make any representation contrary to these guidelines.
|
|
